CPCI-A700 Power Conversion Module
 


The only CompactPCI® Power Supply with 90% + Efficiency AC Universal Input, quad output Converter Delivering Full 700 Watts with IPMI capability

 


Next Power's CPCI-A700 power unit offers ultra-high power density in a 6U plug-in module that meets the requirements of the PICMTM 2.11 R1.0 power interface specification for CompactPCI systems with IPMI functionality. This unit may be used as a single power supply for a CompactPCI chassis. Active current sharing allows multiple units to be paralleled for higher current capability. Efficient OR-ing permits N+1 redundancy and provides hot swap capability.
The CPCI-A700 power unit is based on new principles in power conversion. This new technology achieves over 90% efficiency. Unlike other CPCI power supplies, Next Power's CPCI power supplies deliver 90% efficiency at full load across the entire operating temperature range of 0 to 50°C. Airflow requirements are minimal.

The CPCI-A700 offers exceptional noise and EMI performance, reliability, and is overload and short circuit protected. All four outputs are completely independent. A malfunction on one output will not affect the other outputs. This unit is covered under three U.S. Patents.

FEATURES

Full 700W in 6U x 4HP continuous output at 50° C
Active Power Factor corrected 0,99 at full load
Compliant with PICMTM 2.11 CompactPCI specifications
IPMI capability
Active current sharing from zero to full load for N+1 redundancy and unlimited parallel operation
OR-ing FET drive for efficient OR-ing protection
High current 5V and 3,3V outputs
Fully independent outputs
Ultra-high efficiency over 90% at full load
Exceptional EMI characteristics
Full load on all outputs across 0 to 50°C temperature range with minimal air flow
Hot swap/hot plug capability at full load output
No minimal load required
Overload and overvoltage protected

  DataSheets