The iSCB-AC36XX provides both random and zero-crossing switch modes.
The iSCB-AC36XX immediately reacts to a current surges or short-circuit conditions. The device reacts in 50 ns to limit a current surge to a level of less than 30% above the rated amplitude value.
If any abnormal condition does not clear in 5 ms, the iSCB-AC36XX breaks the connection between the power source and the load, and initiates an alarm signal.
The iSCB-AC36XX restores the connection between the power source and the load as soon as any extended abnormal conditions clears.
The iSCB- AC36XX design is based on novel protection principles that minimize disconnect time to less than 1.5 µs.

The iSCB-AC36XX is applicable for line voltage from 18 VAC to 60 VAC, and line current up to 25 Amps. Other configurations and ratings are optionally available. The iSCB-AC36XX provides more design-friendly functionality than any best competing poly-switch, solid-state relay or solid-state circuit breaker available on the market. The iSCB-AC36XX is covered by two U.S. pending patents.

	Random or zero-crossing switch modes
	Independent over-current, over/under-voltage and over-temp protection
	Over-current surge limiting to less than 30% above the rated amplitude value
	5 ms over-load sustainability prior to an emergency break-off
	Auto restart after an emergency circuit break or over-load clears
	Remote and manual control
	Remote and LED warning
	DC control leads fully isolated from power input and output leads
	Minimal power dissipation with no heat-sink required
	Rapid turn-on/off transition in less than 1.5 µs in random switch mode
	Acute/soft turn-on/off pre-set
	Self-powering by a host power source
	Industry standard package DIN Rail or panel mountable
	Transient suppressor incorporated for inductive load
	Aggregate multiple units to form large solid-state relay contact blocks

  DataSheets